Model Identification and Series Changes
Chapter 1: Introduction
Page 1 - 16 Isolette® Infant Incubator (Model C2000) Service Manual
Model Identification and Series Changes
For Isolette® Infant Incubator model identification, see table 1-6 on
page 1-16.
Table 1-6. Model Identification
For Isolette® Infant Incubator hood/shell assembly series identification,
see table 1-7 on page 1-16.
Table 1-7. Series Identification for the Hood/Shell Assembly
For Isolette® Infant Incubator controller series identification, see table
1-8 on page 1-16.
Table 1-8. Series Identification for the Controller
For Isolette® Infant Incubator fixed height pedestal stand assembly
series identification, see table 1-9 on page 1-17.
Model/Series
Number
Description
C2000 Isolette® Infant Incubator
Model/Series
Number
Description
C2HS-1, C2HS1-400 Isolette® Infant Incubator hood/shell assem-
bly with panel slide latches
C2HS01, C2HS-1,
C2HS-1400
Isolette® Infant Incubator hood/shell assem-
bly with pawl latches
C2HS-02 Isolette® Infant Incubator hood/shell assem-
bly with hood lock
C2HS-03 Isolette® Infant Incubator hood/shell assem-
bly with modification 170
Model/Series
Number
Description
C2C-2-00 Isolette® Infant Incubator controller