Operation
116
Operating Instructions Caleo, Software 2.n
End of Operation
The weighing procedure is complete.
– The current and last weighing results are displayed on the
screen. If the measuring range is exceeded, the symbol
is displayed.
After 10 seconds, the display reverts automatically to the
standard screen.
or
z Press rotary knob to display the standard screen.
The screen displays the last weight as advisory text for the
next 10 minutes.
End of Operation
z Before turning off Caleo, acknowledge all active alarms with
high risk potential. Otherwise the nurse call system* will
continue to indicate the active alarm after the device has
been switched off.
Switch off incubator
1 Press on/off switch to switch off the incubator.
The incubator is turned off.
If O
2 supply hose is connected:**
Disconnect probe from the outlet of the central O
2 supply
pipeline and place it in the "standby" position, if available
(follow respective Instructions for Use).
* Available option
** For available O
2 option
To Next Page
Loading...
