Dräger caleo - Configuration

Operation
104
Operating Instructions Caleo, Software 2.n
Configuration
Configuration
In configuration mode, you may set:
– language, date, and time,
– system parameters, and
– alarm parameters.
Additionally, information may be obtained on:
–O
2 sensors, and
– the software version.
Activating configuration mode
1 Hold down »menu« key for 4 seconds to display
configuration mode.
The individual configuration parameters may now be selected.
2 Turn rotary knob to select configuration parameter.
2 Press rotary knob to activate configuration parameter.
z Press » « key to cancel selection.
– The display returns to the standard screen.
039
D
1
2
062