Operation
103
Operating Instructions Caleo, Software 2.n
Selecting Menus
z Press both soft keys simultaneously to start cleaning mode.
The water heater is boiled dry.
The heater is then cooled.
– A screen message will indicate when the cleaning
procedure has been completed.
z Press rotary knob to confirm end of cleaning mode.
Caleo performs a restart.
After ending Cleaning Mode:
– Disinfect and clean Caleo (see "Disinfecting / Cleaning /
Sterilizing", page 118).
WARNING!
Risk of burns upon contact with the heater!
Do not disassemble Caleo while in cleaning mode.
To Next Page
Loading...
