Need help?Do you have a question about the Dräger Fabius and is the answer not in the manual?
General| Type | Anesthesia Workstation |
|---|---|
| Display | Color TFT |
| Gas Supply | O2, N2O, Air |
| CO2 Absorber | Yes |
| Manufacturer | Dräger |
| Model | Fabius |
| Ventilation Modes | SIMV |
| Inspiratory Time | 0.2-5 s |
| PEEP | 0 to 20 cmH2O |
| Vaporizer Mounts | 2 |
| O2 Flow | 0 to 15 L/min |
| Air Flow | 0 to 15 L/min |
Covers general safety warnings and cautions for device operation, EMC/ESD risks, and accessories.
Describes the main elements of the control panel: screen, keys, and indicators.
Details the layout and information presented on the Fabius MRI screen display.
Outlines the procedure to ensure the machine is ready for operation after assembly.
Instructions on adjusting the fresh gas flow using control knobs on the front panel.
Covers Manual/Spontaneous, Volume Control, Pressure Control, Pressure Support, and SIMV/PS modes.
Explains alarm categories, indication methods, and sorting of displayed alarms.
Details the procedure for initiating system compliance and leak tests.
Lists alarm messages, probable causes, and remedies categorized by priority.
To Next Page