Dräger Fabius - Silencing Alarms; Disabling Volume Alarms

Monitoring
120
Instructions for Use Fabius MRI SW 3.n
Silencing Alarms
1 Press the »Silence« key to silence all active
audible alarms for two minutes. The yellow LED
lights up.
The symbol » « appears in the status bar with
an indication of the silence time remaining.
To enable the alarm tone:
1 Press the »Silence« key, the yellow LED turns
off.
Disabling Volume Alarms
Visual and audible volume alarms can be turned on
or off during operation using the »Setup« key. See
“Volume Alarms On/Off” on page 153.
566
1