Dräger Fabius User Manual

Assembly
70
Instructions for Use Fabius MRI SW 3.n
Connecting the Flow Sensor
1 Connect the volume line cable onto the connec-
tor on the underside of the breathing system.
2 Connect the volume line cable to the port
labeled on the connector panel on the back
of the machine.
Connecting the APL Bypass and
PEEP/P
MAX Hoses
3 Plug the control hose to the connection port on
the PEEP/P
MAX valve and to the connection
port marked PEEP on the connection panel.
4 Plug the control hose to the connection port on
the APL Bypass valve and to the connection
port marked APL on the connection panel.
NOTE
The APL bypass hose is larger than the
PEEP/PMAX hose.
019
1
2
020
3
4

Dräger Fabius Specifications

General

Type	Anesthesia Workstation
Display	Color TFT
Gas Supply	O2, N2O, Air
CO2 Absorber	Yes
Manufacturer	Dräger
Model	Fabius
Ventilation Modes	SIMV
Inspiratory Time	0.2-5 s
PEEP	0 to 20 cmH2O
Vaporizer Mounts	2
O2 Flow	0 to 15 L/min
Air Flow	0 to 15 L/min