Dräger Fabius - Default Settings in Standby Setup

Instructions for Use Fabius MRI SW 3.n 141
Configuration
Default Settings in Standby Setup
z Select and confirm the »Default Settings«
label on the Standby Setup screen. (Selecting
and confirming the return arrow will exit the
Default Settings column and redisplay the main
Setup screen.)
The following settings are available under Default
Settings:
–»Volume Settings«
–»Pressure Settings«
–»Pressure Support Settings«
–»SIMV/PS Settings«
–»Alarm Limits«
–»Alarm Volume«
–»Restore Factory Defaults«
Volume Settings
z Select and confirm the »Volume Settings«
label on the Standby Setup screen. The Default
Volume Settings window appears at the bottom
of the screen.
505
536