Instructions for Use Fabius MRI SW 3.n 199
Technical Data
Electromagnetic Compatibility (EMC)
General information
The EMC conformity of the Fabius MRI includes
the use of following external cables, transducers
and accessories:
Additionally, accessories may be used which do not
affect EMC compliance, if no other reasons
(see Accessories List) interdict the use of them.
The non-observance may result in increased emis-
sions or de-creased immunity of the equipment.
The Fabius MRI should not be used adjacent to or
stacked with other equipment; if adjacent or
stacked use is inevitable, the Fabius MRI should be
observed to verify normal operation in the configu-
ration in which it will be used.
Other equipment which can be used adjacent to or
stacked with this device are listed in the accesso-
ries list.
Description Order-No.
RS-232, optical interface, connected to COM1, 30 m 8608376
O
2 Sensor Cable (cable-shielded-28 AWG-4 cond) 8606051
To Next Page
Loading...
Need help?
General
