Dräger Fabius User Manual

Instructions for Use Fabius MRI SW 3.n 217
Appendix 1 - Daily and Pre-use Checkout Form
Before operating the Fabius MRI, the following
checkout verification form must be completed to
ensure that the machine is ready for use. Do not
insert any additional components into or modify the
anesthesia workstation after the checkout proce-
dure is started.
This is a recommended procedure. Follow your
institution's policies for specific checkout proce-
dures.
CAUTION
If any check cannot be carried out satisfactorily,
the machine must not be used.
Call DrägerService or your local authorized ser-
vice organization.
NOTE
Throughout this section, cmH2O = mbar = hPa

Dräger Fabius Specifications

General

Type	Anesthesia Workstation
Display	Color TFT
Gas Supply	O2, N2O, Air
CO2 Absorber	Yes
Manufacturer	Dräger
Model	Fabius
Ventilation Modes	SIMV
Inspiratory Time	0.2-5 s
PEEP	0 to 20 cmH2O
Vaporizer Mounts	2
O2 Flow	0 to 15 L/min
Air Flow	0 to 15 L/min