EasyManuals Logo

Dräger Fabius User Manual

Dräger Fabius
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
Operation
94
Instructions for Use Fabius MRI SW 3.n
Ventilation
Manual/Spontaneous Ventilation Mode
ManSpont (Manual/Spontaneous) is a non-auto-
matic mode of ventilation. However, the ventilation
monitor and alarms are still operational. In
ManSpont mode, the ventilator piston is moved par-
tially upward to reduce system compliance. Manual
ventilation (with APL valve pressure limit) can be
delivered with the APL valve in the MAN position.
Spontaneous ventilation (APL valve wide-open)
can occur with the APL valve in the »Spont« posi-
tion.
The following examples and illustrations describe
starting Man/Spont ventilation from the present
ventilation mode »Volume Control«:
For Spontaneous Breathing:
z Rotate the APL valve knob fully counterclock-
wise until the index mark on the knob lines up
with the index mark on the bottom of the
valve.The valve is now open for spontaneous
patient breathing.
z Set the appropriate fresh gas flow.
1 Press the »ManSpont« key. The LED associ-
ated with this key starts blinking. It remains
blinking until the selected mode of operation is
confirmed.
2 The Waveform window is replaced by the
ManSpont window and a message that pro-
vides instructions to confirm the mode change.
WARNING
Risk of strangulation
Use caution when connecting the patient.
022
518
1
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dräger Fabius and is the answer not in the manual?

Dräger Fabius Specifications

General IconGeneral
TypeAnesthesia Workstation
DisplayColor TFT
Gas SupplyO2, N2O, Air
CO2 AbsorberYes
ManufacturerDräger
ModelFabius
Ventilation ModesSIMV
Inspiratory Time0.2-5 s
PEEP0 to 20 cmH2O
Vaporizer Mounts2
O2 Flow0 to 15 L/min
Air Flow0 to 15 L/min

Related product manuals