Dräger Fabius - Screw the Waste Gas Port; Installing Remaining Breathing System Compo; Nents

Instructions for Use Fabius MRI SW 3.n 179
Cleaning
Screw the waste gas port
z Screw in the waste gas port from below into the
compact breathing system. Make sure there is
a tight seal.
Installing Remaining Breathing System Compo-
nents
z Follow instructions beginning on page 52 to
reinstall the following breathing system compo-
nents:
– flow sensor
– breathing system
– ventilation hose
– fresh gas hose
– breathing bag extension* and bag
– flow sensor and breathing pressure cables
– APL bypass and PEEP/P
MAX cables
–O
2 sensor cable
– breathing system hoses
z Follow instructions on page 189 to reinstall the
absorber system
*optional
048