Need help?Do you have a question about the Dräger Babylog VN500 and is the answer not in the manual?
General| Type | Neonatal Ventilator |
|---|---|
| Category | Medical Equipment |
| Power Supply | 100 – 240 VAC, 50/60 Hz |
| Battery Backup | Yes |
| Modes of Ventilation | CPAP |
| Patient Categories | Neonates, Infants |
| Tidal Volume Range | 2 – 300 mL |
| Respiratory Rate | 1 to 150 breaths per minute |
| PEEP | 0 to 20 cmH2O |
| FiO2 | 21% - 100% |
| Inspiratory Time Range | 0.1 – 3 s |
| Leak Compensation | Automatic |
| Display | Touchscreen |
| Monitoring Parameters | Pressure, Volume, Flow |
| Alarms | Apnea |
Details critical safety instructions and potential hazards associated with device operation.
Specifies the primary purpose and intended application of the Babylog VN500 ventilation unit.
Lists the medical conditions for which the device is indicated and situations where it should not be used.
Identifies and describes the main parts and connections of the Babylog VN500 unit.
Lists the various ventilation modes, monitoring capabilities, and additional features of the Babylog VN500.
Covers essential safety guidelines to follow before preparing the device.
Details the procedures for preparing the Babylog VN500 ventilation unit.
Covers critical safety considerations before initial setup and operation.
Guides users through selecting patient data and the appropriate therapy type.
Details the necessary checks to ensure the device is ready for patient use.
Explains how to configure ventilation modes and adjust operational parameters.
Describes the procedures and settings for non-invasive ventilation modes.
Provides specific instructions for calibrating the neonatal flow sensor.
To Next Page