Need help?Do you have a question about the Dräger Atlan A300 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Dräger |
| Model | Atlan A300 |
| Type | Anesthesia Workstation |
| Tidal Volume Range | 50 - 1500 ml |
| PEEP | 0 - 20 mbar |
| Oxygen Concentration | 21 - 100% |
| Gas Supply | O2, Air, N2O |
| Display | Touchscreen Display |
| Integrated Monitoring | Yes |
| Connectivity | Ethernet, USB |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
| Ventilation Modes | Volume Control, Pressure Control, SIMV, CPAP, BiPAP |
Steps required before operating the device for the initial time.
Instructions for correctly connecting central and cylinder gas supplies.
Guidance on choosing and attaching patient-specific accessories.
Step-by-step instructions for powering on the device.
Procedure for starting the device in emergency situations.
Step-by-step guide to initiate patient therapy sessions.
Procedures for setting and modifying alarm limits and behavior.
Detailed instructions for executing system and leakage verification tests.
Steps and procedures for responding to and managing device alarms.
Configuration of alarm parameters, limits, and behavior.
Diagnosing and resolving issues related to system leaks.
Troubleshooting steps for power-related failures and battery issues.
Procedures for diagnosing and resolving issues with gas supply.
Troubleshooting steps for problems with the O2 sensor.
Steps to take when the device screen is unresponsive or faulty.
Ensuring the device is ready for operation after reprocessing.
Information and recommendations regarding device repairs.
Safety guidelines related to the operational principles of the device.
Explanation of the different ventilation modes and their functions.
To Next Page
