Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n 11
Safety-related information
2.6 User group requirements
The term "user group" describes the responsible personnel who have been
assigned by the operating organization to perform specific tasks on the product.
2.6.1 Duties of the operating organization
The operating organization must ensure the following:
– Each user group has the required qualification (e.g., has undergone specialist
training or acquired specialist knowledge through experience).
– Each user group has been trained to perform the task.
– Each user group has read and understood the relevant chapters in this
document.
2.6.2 User groups
Clinical users
This user group uses the product in accordance with the intended use.
Reprocessing personnel
This user group performs reprocessing activities.
Service personnel
This user group installs the product and performs service activities.
If product-specific skills or tools are required, then the service activities must be
performed by specialized service personnel. The specialized service personnel
have been trained by Dräger to perform these specific service activities on this
specific product.
2.7 Information on safety instructions and precautionary
statements
Safety instructions and precautionary statements warn of risks and give instructions
for the safe use of the product. Failure to observe them may lead to personal injury
or property damage.
2.7.1 Safety instructions
This document contains sections with safety instructions which warn of risks. The
type of risk and the consequences of non-compliance are described in each safety
instruction.
2.7.2 Precautionary statements
Precautionary statements relate to action steps and warn of risks that may arise
when performing the action steps. Precautionary statements precede the action
steps.
To Next Page
Loading...
Need help?
General
