Dräger Atlan A300 - Tests; Status of the device functions

126 Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n
Tests
8 Tests
8.1 Status of the device functions
► In the standby mode, touch the Details... button or the Tests... button.
The Test results list (1) shows the results of the test last performed. The following
information is displayed using different colors:
– Influence of the individual device functions on the functional integrity of the
device
– Leakage values
35069
Color Meaning
Green Successfully tested, fully available
Yellow A non-critical fault has been detected. The device can be operated
with restricted function.
Red A serious fault has been detected. Operation is not possible or is for-
bidden.
Gray Not tested
1
Test results
Available tests