Dräger Infinity Series Quick Reference Guide

Infinity Delta/Delta XL/Kappa - Quick Reference Guide
Intended for quick reference only.
Refer to Instruction For Use Manual.
INFINITY DELTA/DELTA XL/KAPPA - QUICK REFERENCE GUIDE | 20
© 2010 Draeger Medical, Inc.
NIBP Problems
NIBP did not occur as
desired
Monitor has message
of NIBP open line
Monitor shows mean
b/p only
NBP Low inflation
Limit
NBP Cannot Measure
Possible Cause
Interval change not
saved.
Leak between hose
and cuff.
Incorrect cuff size
Patient’s pulse is too
low for monitor to
derive systolic and
diastolic pressure
values but large
enough to report mean
pressure.
Patient’s systolic
pressure is higher than
the maximum allowed
inflation limit.
Pulse profile is too
poor to make a reliable
measurement (usually
owing to persistent
motion artifact).
Action
Initiate b/p or double
click start/stop nbp
with new interval
Disconnect and
reconnect hose to
cuff.
Ensure that cuff size
and placement is
correct. Check the
patient and treat if
necessary. Check
hose and cuff.
Select the next higher
NBP inflation limit
setting.
Check the patient and
treat if necessary.
Move cuff to a limb
with less movement.
Restart measurement.
If message persists
contact Biomed or
Technical Support.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)