Manual cleaning and disinfection:
Please use the disinfectants listed in the
Instructions for use of the Dräger flow sensors.
Machine cleaning and disinfection:
Recommendation: Position components so that
all interior spaces and surfaces are completely
flushed and water can drain off freely.
Sterilization:
SpiroLife® flow sensors are not suitable
for plasma or radiation sterilization.
Visual check
Manual cleaning
and disinfection
Machine cleaning
and disinfection
Sterilization
Position components so that all interior spaces and surfaces are completely flushed and water can drain off freely.
Dräger Zeus® Breathing System
Reprocessing Instructions
D-7417-2014
This guideline does not replace the instruction for use.