Dragino LA66 - Example: Send & Get Messages Via Lorawan in Rpi

To Next Page

To Previous Page

User Manual for LoRaWAN End Nodes - LA66 USB LoRaWAN Adapter User Manual

Use python as an

example：

https://github.com/dragino/LA66/blob/main/

Send_information_to_TTN_WindosPC.py

(Raspberry Piexample:https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry

%20Pi.py)

Preconditions:

1. LA66 USB LoRaWAN Adapter works ﬁne

2. LA66 USB LoRaWAN Adapter is registered with TTN

Steps for usage:

1. Press the reset switch RESET on the LA66 USB LoRaWAN Adapter

2.Add decoder on TTN

3. Run the python script in PC and see the TTN

1.8 Example: Send & Get Messages via LoRaWAN in RPi

Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN

network coverage.

1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi

Page 16 / 30 - last modiﬁed by Xiaoling on 2022/12/29 09:45