User Manual for LoRaWAN End Nodes - LA66 USB LoRaWAN Adapter User Manual
1.2 Features
• LoRaWAN USB adapter base on LA66 LoRaWAN module
• Ultra-long RF range
• Support LoRaWAN v1.0.4 protocol
• Support peer-to-peer protocol
• TCXO crystal to ensure RF performance on low temperature
• Spring RF antenna
• Available in different frequency LoRaWAN frequency bands.
• World-wide unique OTAA keys.
• AT Command via UART-TTL interface
• Firmware upgradable via UART interface
• Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
1.3 Specification
• CPU: 32-bit 48 MHz
• Flash: 256KB
• RAM: 64KB
• Input Power Range: 5v
• Frequency Range: 150 MHz ~ 960 MHz
• Maximum Power +22 dBm constant RF output
• High sensitivity: -148 dBm
• Temperature:
• Storage: -55 ~ +125℃
• Operating: -40 ~ +85℃
• Humidity:
• Storage: 5 ~ 95% (Non-Condensing)
• Operating: 10 ~ 95% (Non-Condensing)
• LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
• LoRa Rx current: <9 mA
1.4 Pin Mapping & LED
Page 4 / 30 - last modified by Xiaoling on 2022/12/29 09:45
To Next Page
Loading...