MAINTENANCE
3
Corn Head Clinic Guide - GT
MAINTENANCE
The maintenance items in this section outlines the recommended intervals and lubricants required to keep the
corn head functioning properly.
For more information on maintenance items and repairs please refer to your Operators Manual or the Drago
Service Video website at https://www.dragotec.com/service-video
It is important to use only the lubricants specified or degradation of corn head performance may appear over
time. Unlike most other EP0 greases, Mobilux EP0 grease does not use clay or polymers as the base material.
When clay-based greases are used over time the grease evaporates and leaves behind the base material. This base
material deposit can build up over time preventing normal operation. This is the common cause of deck plates and
gathering chain tensioners to stick. The pictures below show what the base material deposits look like.
To Next Page
Loading...
