Dragon Touch Classic 8 - Uploading Photos and Videos; Uploading via USB Drive; Uploading via SD Card

4. Uploading Photos and Videos via a USB Drive
① Insert a USB drive into the frame, and wait for seconds, the frame will notify you
when the USB drive is successfully connected.
② Enter the Photo or Video library, click USB and you will see all the photos or
videos stored in the USB drive.
③ Click the More icon at the upper right corner, select the photos or videos you
would like to import to the internal memory of the frame.
④ Click the Share icon at the top then choose OK to import the photos or videos.
⑤ Your photos or videos will be received in seconds, you can check the photo or
video library on the frame.
Note:
• If you have too many files stored in the USB drive, it will take more time to read.
• The system will protect and lock the USB drive if there is no action after the USB
drive has been plugged in for a while. To activate it, you need to take it out and
plug it in again.
• Please remove all your external devices when you reset the photo frame.
All files
Internal Storage
photo
SD Card
USB
Favorites
User 1
Import
Import files to memory
Cancel
OK
Selected 215
Note: The above screenshot is for reference, please update to the latest firmware
version later.
5. Uploading Photos and Videos via an SD Card
① Insert an SD card into the frame, and wait for seconds, the frame will notify you
when the SD card is successfully connected.
② Enter the Photo or Video library, click SD card and you will see all the photos or
videos stored in the SD card.
③ Click the More icon at the upper right corner, select the photos or videos you
would like to import to the internal memory of the frame.
④ Click the Share icon at the top then choose OK to import the photos or videos.
⑤ Your photos or videos will be received in seconds, you can check the photo or
video library on the frame.
Note:
• Max support a 32GB SD card.
• If you have too many files stored in the SD card, it will take more time to read.
• The system will protect and lock the SD card, if there is no action after the SD
card has been inserted for a while. To activate it, you need to take it out and
insert again.
• Please remove all your external devices when you reset the photo frame.
11 12