DRAKE DSE 2 PLUS - Specifications

6
937.746.4556 | www.rldrake.com
Specifications
ENCODER - VIDEO (Specicaons are per Encoder)
Video Inputs: VGA (with pass-through to monitor),
HDMI (non-HDCP Copy Protected),
Component (Y-Cr-Cb),
Composite (via Y-Input for 480i)
Video Resoluon Modes: 480i (640x480 / 720x480 @ 30 fps),
480p (640x480 / 720x480 @ 60 fps),
720p (1280x 720 @ 60 fps),
1080i (1920x1080 @ 30 fps)
Video Input Resoluon Detecon: Yes, automac
Video Compression Format: MPEG2 or MPEG4 / H.264
Video Adjustments: Brightness, Contrast, Hue, Saturaon, Sharpness
MPEG4 / H.264 Proles Supported: Simple, Advanced Simple, High
Bitrate: 0.000 to 19 Mbps (depending on format)
ENCODER - AUDIO (Specicaons are per Encoder)
Audio Inputs: HDMI-embedded audio, 32 - 192 kHz sample rate PCM
RCA-type L + R 1 x 1 Vrms nominal
3.5 Vrms max supports +/- 15 dB gain adjustment
Audio Compression Formats: Dolby® Digital or MPEG1, Layer 2
QAM (Quadrature Amplitude Modulaon) MODULATOR / MULTIPLEXER (per chassis)
QAM Output Modes: 64 QAM or 256 QAM, ITU Annex B
Frequency Coverage: 5 - 1002 MHz
Channel Plans: Standard CATV, HRC, IRC, Broadcast and T Channels
Maximum Output Power Level: + 45 dBmV
Level Adjustment Range: 15 dB
Phase Noise: - 95 dBc @ 10 kHz oset
Broadband Noise: - 75 dBc @ > +/- 12 MHz
MER: > 40 dB equalized
Channel Frequency Response: < 1 dB
Carrier Suppression: > 40 dB
I/Q Inbalance: < 1 degree
Output Level Accuracy: +/- 1 dB
Specifications, price, and availability are subject to change without notice or obligation.
QAM (Quadrature Amplitude Modulaon) MODULATOR / MULTIPLEXER (per chassis)
Form Factor: 1RU 19” rack mountable
Control: On-board Ethernet Connecon
Power Requirements: +5 V @ 3.5A via supplied external power supply
Dimensions: 10.5’’D x 2.0’’H x 19’’ W
Weight: 4.5 lbs.
Temperature Rang: 0 - 50˚ C ambient