8
937.746.4556 | www.rldrake.com
The DSE 2 PLUS encodes up to two uncompressed programs from devices with HDMI (non HDCP encrypted), High-
Resolution Component Video, Composite or VGA outputs. The DSE 2 PLUS encodes the incoming programs to MPEG-2
or MPEG-4/H.264 compressed video. An internal multiplexing QAM modulator and low-noise upconverter allows programs
to be combined with existing digital and or analog programming.
• Encodes a HD & SD stream of the same content in either MPEG-2 or H.264 formats
• Receives High-Resolution Component, VGA, or HDMI (non-HDCP content-protection) from two separate video sources.
• Video encodes to MPEG-2 or MPEG-4/H.264
• Supports 480i, 480p, 720p, or 1080i video resolution
• Audio encoding to Dolby Digital® or MPEG1-Layer 2
• Supports Closed Captioning
• High-level (+45 dBmV) agile output programmable from 5 to 1,000 MHz using STD, HRC, IRC, and
Broadcast channel plans
• GUI-based Remote Network Control and Monitoring
General Description & Features
To Next Page
Loading...
