DRAKE SP75 - VII. SERVICE DATA

With an input signal of 10 mV at the microphone input and with the micro-
phone gain,
R5, set to maximum, the following audio levels should result. All
values are r.m.s, AC volts.
1) At test point 2,50 mV.
2) At test point 3,200 mV.
3) At test point 4,1.0 volt.
4) At test point 5,70
mV with clipping control at 20 dB.
5) Approximately 25 mV at test point 12.
VII. SERVICE DATA
The SP75 will be checked and aligned at the factory for a nominal fee if there is
no evidence of tampering. Transportation charges are extra. Any necessary
repairs will be made on a time and materials basis. Please write or call the
factory for authorization before returning your unit for alignment or service.
Address your requests for authorization to:
R. L. DRAKE COMPANY
540 Richard Street
Miamisburg, OH 45342
ATTN: Customer Service Department.
Telephone: (Area Code 513) 866-3211
Telex: 288-017
9
,