To Next PageTo Next Page
Need help?Do you have a question about the Draper D16/16 and is the answer not in the manual?
General| Brand | Draper |
|---|---|
| Model | D16/16 |
| Category | Power Tool |
| Language | English |
Overview of the manual and important safety guidelines for the drill press.
Details on the Draper Drill Press, stock numbers, and part numbers.
Information on the directives and standards the drill press conforms to, including part details.
Detailed technical specifications of the drill press, including dimensions and capacity.
Details about the 12-month guarantee period, terms, and conditions.
Instructions for connecting the drill press to a 230V power supply, including plug and fuse details.
Guidance on selecting appropriate wire sizes for extension leads based on length and current.
Essential guidelines for safe operation, including work area, clothing, and personal protection.
Safety rules for tool operation, maintenance, and securing workpieces.
Important note on residual risks associated with power tools and the need for continued caution.
Specific safety precautions for operating a drill press, including bit security and speed selection.
Steps for carefully unpacking the drill press and checking all included parts.
Identification and labeling of all major components of the drill press with a visual diagram.
Instructions for securing the column to the base and installing the worm gear and rack.
Guidance on placing the rack in the table bracket and sliding it onto the column.
Steps for installing the table, raising handle, and drill press head onto the column.
Instructions for attaching the downfeed handles and fitting the chuck to the spindle.
Steps for installing the chuck guard and securing the arbor to the spindle.
Explanation of the drill press's no-volt on/off switch and its emergency stop function.
Information on available spindle speeds and how to change them by adjusting belt tension.
Instructions for raising, lowering, rotating, and tilting the drill press table using its controls.
Procedure for adjusting the spindle return spring for automatic upward movement after drilling.
Guide on using the depth stop to drill holes to a precise and consistent depth.
Guidance for new operators and specific instructions for drilling into metal workpieces.
Troubleshooting guide for common drill press issues like noisy operation, bit smoking, and binding.
Details of available wood morticing attachments for the drill press, including model numbers.
Information on drill press vices, including stock numbers, jaw width, and opening capacity.
