Need help?Do you have a question about the Draper TS210A Hobby and is the answer not in the manual?
Includes knowing the tool, work area, attire, eye/ear protection, and staying alert.
Covers shock prevention, cord care, accidental starting, and safe tool maintenance.
Addresses noise, vibration, dust, outdoor use, and cable access hazards.
Emphasizes secure mounting and understanding/avoiding kickback through proper techniques.
Focuses on workpiece control, tool condition checks, and using appropriate extension leads.
Inspect the product for damage after unpacking and dispose of packaging safely.
Covers fitting the sawblade, securing the blade guard, and riving knife placement.
Describes installing the mitre guide slot and assembling the rip fence.
Details the critical step of securely mounting the table saw to a stand or workbench.
Explains table turning for bevel cuts and the function of the no-volt ON/OFF switch.
Covers connecting dust extraction and using the mitre guide for accurate cross-cuts.
Details rip fence usage and safe practices for ripping operations, including kickback avoidance.
Outlines methods for performing bevel ripping, bevel cross-cutting, and mitre cuts.
Install the flexible drive shaft by removing the blade guard and screwing it onto the spindle.
To Next Page
General
