Draper 88192 User Manual

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
550mm
PRECISION
MITRE SAW
88192

Draper 88192 Specifications

General

Brand	Draper
Model	88192
Category	Saw
Language	English

Summary

Product Instructions

Parts Drawing and Components

Vice Clamp Assembly

Assembly for securing the workpiece during cutting operations.

Length Stop Assembly

Component used for setting and repeating cut lengths accurately.

Cut Depth Stop

Mechanism to control and limit the depth of the saw cut.

Base

The main structural support and foundation of the mitre saw.

Pre-set Angle Arm

Arm designed for quick selection of common pre-set cutting angles.

Cursor

Indicator used to read the angle settings on the saw's base.

Blade Tensioning Nut

Component for adjusting the tension of the saw blade.

Saw Table

The flat surface where the workpiece is positioned for cutting.

Saw Frame Handle

The handle used to lower and raise the saw frame during operation.

Saw Blade

The primary cutting element of the mitre saw.

Saw Frame Assembly

The main assembly that holds and guides the saw blade.

Important Usage Warnings

Blade Tension and Alignment

Ensure correct blade tension to prevent whip and maintain alignment for true cuts.

Workpiece Positioning

Ensure the workpiece is square and true to the base casting for accurate mitre cuts.

Post-Use Procedure

Release blade tension after completing work to prolong component life.

Instruction Manual Review

Thoroughly read the entire instruction leaflet before operating the equipment.

Notes

Contact and Support Information

Draper Tools Limited Details

Manufacturer's full contact address and general inquiry numbers.

Helpline and Sales Support

Contact numbers for customer service, sales, and technical assistance.

Online and Email Contact

Website and email address for accessing information and sales.

Service and Warranty Agent

Information on obtaining aftersales servicing or warranty repairs.