Draper 10.8V User Manual

INSTRUCTIONS FOR
10.8V Cordless
Reciprocating Sa
w - Bare
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
STORM
Stock No.17129 Part No.SS108SF

Draper 10.8V Specifications

General

Brand	Draper
Model	10.8V
Category	Saw
Language	English

Summary

3. GUARANTEE

3.1 GUARANTEE

5. HEALTH & SAFETY INFORMATION

5.1 GENERAL SAFETY INSTRUCTIONS

Covers general power tool safety rules for work area, electrical safety, personal safety, and tool use/care.

5.2 GENERAL INSTRUCTIONS FOR BATTERY POWERED TOOLS & CHARGERS

Safety advice for battery-powered tools, including handling battery packs, workplace safety, and environmental precautions.

5.3 SAFETY INSTRUCTIONS FOR MAINS POWERED BATTERY PACK CHARGERS

Safety guidelines for using mains-powered battery chargers, focusing on indoor use, proper connections, and maintenance.

5.4 INSTRUCTIONS FOR CHARGERS AND BATTERIES

Specific instructions for charging batteries, handling batteries, and disposal, including fire safety and temperature limits.

5.5 ADDITIONAL SAFETY INSTRUCTIONS FOR RECIPROCATING TOOLS

Essential safety precautions for reciprocating saws, emphasizing dust extraction and personal protective equipment.

8. SETTING THE CORDLESS RECIPROCATING SAW

8.1 BLADE INSTALLATION

9. BASIC RECIPROCATING SAW OPERATION

9.1 SWITCH AND VARIABLE STROKE RATE CONTROL

9.2 GENERAL CUTTING

Provides detailed instructions for general cutting, including workpiece anchoring, blade selection, and cutting techniques.

9.3 PLUNGE CUTTING

9.4 FLUSH CUTTING

11. MAINTENANCE

11.1 MAINTENANCE

12. TROUBLESHOOTING