Draper WTL90 User Manual

VARIABLE SPEED
WOOD LATHES
■ STOCK No.39042 ■ PART No.WTL90
63938 WTL95
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
02/2001

Draper WTL90 Specifications

General

Brand	Draper
Model	WTL90
Category	Lathe
Language	English

Summary

Specification

Power Supply

General Safety Instructions for Power Tools

Additional Safety Rules for Wood Lathes

Assembly

Wood Lathe Stand Assembly and Securing

Instructions for assembling the stand and securing it.

Mounting Lathe to Stand

Steps for lifting and bolting the lathe onto the stand.

No-Volt On/Off Switch Installation

Guidance on fitting the no-volt switch to the stand.

Operation & Use

No-Volt On/Off Switch Operation

How to use the emergency stop and standard on/off switch.

Changing Speed

Procedure for adjusting the lathe's speed while running.

Basic Woodturning

Using Woodworking Chisels

Overview of common chisel types and their uses.

Tool Rest Positioning for Turning

Guidance on correct tool rest placement for circumference turning.

Tool Rest Positioning for Scraping

How to position the tool rest for circumference scraping operations.

Chisel & Tool Rest for Diameter Scraping

Correct positioning for diameter scraping techniques.

Troubleshooting