Draper WTL95 - User Manual

VARIABLE SPEED
WOOD LATHES
■ STOCK No.39042 ■ PART No.WTL90
63938 WTL95
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
02/2001

Summary

Specification

Power Supply

Wiring Diagram

General Safety Instructions

Additional Safety Rules for Wood Lathes

Specific safety precautions tailored for wood lathe operation.

Assembly

Operation & Use

No-Volt On;Off Switch

Changing Speed

Rotating the Headstock

How to rotate the headstock for different turning angles.

Moving the Tailstock

How to slide and lock the tailstock into position.

Adjusting the Tool Rest

Methods for positioning and adjusting the tool rest.

Basic Woodturning

Spindle Turning

A practical guide to performing spindle turning operations.

Using Woodworking Chisels

Overview of common woodturning chisels and their functions.

Cutting and Scraping

Knowing When to Cut and When to Scrape

Positioning the Tool Rest for Circumference Turning

How to correctly position the tool rest for circumference turning.

Positioning the Tool Rest for Diameter Scraping

Correct positioning of the tool rest for diameter scraping.

Positioning Chisel and Tool Rest for Diameter Scraping

Using the Gouge Chisel

Using a Skew Chisel

Using a Parting Chisel

Using Scraping Chisels

Troubleshooting

Draper WTL95 Specifications

General

Brand	Draper
Model	WTL95
Category	Lathe
Language	English