Do you have a question about the Drawmer 1973 and is the answer not in the manual?
Frequency Bands | 3 |
---|---|
Input Impedance | 20k Ohms |
Bands | 3 |
Dimensions | 482mm x 44mm x 200mm |
Weight | 3.5kg |
Inputs | XLR |
Outputs | XLR |
Frequency Range | 20Hz to 20kHz |
Noise | -90dBu |
Power Supply | Internal PSU |
THD | <0.05% @ +10dBu |
Warning about using the correct fuse type and rating to prevent fire risk.
Instruction not to change or tamper with the supplied mains cable.
Guidance to refer all servicing to qualified service personnel.
Precaution to avoid fire or electric shock by keeping equipment dry.
Warning about the risk of electric shock if the unit is opened.
An overview of the Drawmer 1973 FET Compressor, its purpose, and benefits.
Key capabilities including multiband processing, FET design, and intuitive controls.
Troubleshooting advice for ground loop issues in audio connections.
Recommendations for balanced connections to mitigate interference.
Explanation of the unit's layout and the function of its core controls.
Details on setting crossover points for splitting audio into frequency bands.
Procedures for warranty service, returns, and problem reporting.
Drawmer contact details for technical help, sales, and general inquiries.
Technical specifications including input/output, frequency response, and power.