Drawmer MXPro MX30 User Manual

DRAWMER
MX30
DUAL GATED COMPRESSOR
OPERATORS MANUAL
CONTENTS
SAFETY CONSIDERATIONS page 1
INTRODUCTION page 2
INSTALLATION page 3
• Audio Connections page 3
• Power Connection page 5
CONTROL DESCRIPTIONS page 6
• Gate / Expander page 6
• Compressor page 7
• Limiter page 8
• Linking page 8
OPERATION page 9
IF A FAULT DEVELOPS page 10
CONTACTING DRAWMER page 10
TECHNICAL SPECIFICATION page 11
BLOCK DIAGRAM page 12
SESSION RECALL SHEET page 13
i

Drawmer MXPro MX30 Specifications

General

Channels	2
Input Impedance	10 kΩ
Type	Dual Channel Compressor/Limiter
Inputs	2 x XLR
Outputs	2 x XLR
Sidechain I/O	Yes
Threshold	-20dBu to +20dBu
Ratio	1:1 to ∞:1
Attack Time	0.1 to 100 ms
Frequency Response	20 Hz - 20 kHz (±0.5 dB)

Summary

Safety Considerations

Mains Safety and Servicing

Covers essential safety warnings for mains fuse, cable, and servicing to prevent hazards.

Introduction

Installation

Audio Connections

Guides on connecting audio signals using balanced XLR and unbalanced jack interfaces.

Power Connection

Control Description

Gate and Expander Controls

Details on the Gate Threshold and Release controls for audio gating and expansion.

Compressor Controls

Explanation of Threshold, Ratio, and Gain Reduction Meter for compression adjustments.

Peak Limiter and Linking

Describes the Peak Limiter Level control and the stereo linking functionality.

Operation

If a Fault Develops

Contacting Drawmer

Technical Specifications

Block Diagram