Draytek Vigor 130 User Manual

o Descriptions of Components
LED Status Explanation
Off The system is not ready or is failed. ACT
Blinking The system is ready and can work normally.
On A normal connection is through its corresponding port.
Off LAN is disconnected.
LAN
Blinking Data is transmitting (sending/receiving).
On The DoS/DDoS function is active. DoS
Blinking It will blink while detecting an attack.
On DSL connection synchronized. DSL
Blinking DSL connection is synchronizing.
Interface Description
DSL Connecter for accessing the Internet through VDSL2/ADSL2/2+.
LAN Connecter for local networked devices.
Factory
Reset
Restore the default settings. Usage: Turn on the modem. Press the
button and keep for more than 10 seconds. Then the modem will
restart with the factory default configuration.
ON/OFF: Power switch.
Connecter for a power adapter.

Draytek Vigor 130 Specifications

General

Ethernet WAN	Yes
SIM card slot	No
3G/4G USB modem compatibility	-
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Mobile network generation	Not supported
Ethernet LAN (RJ-45) ports	1
Product color	White
Power source type	DC
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	20 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	125 mm
Width	182 mm
Height	40 mm
Weight	240 g