Vigor160 Series User’s Guide
16
Subnet Mask Assign a subnet mask value for the protocol of MPoA/Static
or Dynamic IP.
Default Gateway Assign an IP address to the gateway for the protocol of
MPoA/Static or Dynamic IP.
Primary DNS Assign an IP address to the primary DNS.
Second DNS Assign an IP address to the secondary DNS.
VLAN Tag insertion
(VDSL2)/(ADSL)
The settings configured in this field are available for WAN1
and WAN2.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The range
is from 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
Back Click it to return to previous setting page.
Next Click it to get into the next setting page.
Cancel Click it to give up the quick start wizard.
2. After finished the above settings, simply click Next.
Available settings are explained as follows:
Item Description
Service Name
(Optional)
Enter the description of the specific network service.
User Name Type in the valid user name (maximum 63 characters)
provided by the ISP in this field.
Password Type a valid password provided by the ISP.
Confirm Password Retype the password.
To Next Page
Loading...
Need help?
General
