Draytek Vigor 160 Series User Manual

Vigor160 Series User’s Guide
46
ISP for detailed information.
QoS Type - Select a proper QoS type for the channel.
PCR - It represents Peak Cell Rate. The default setting is “0”.
SCR - It represents Sustainable Cell Rate. The value of SCR
must be smaller than PCR.
MBS - It represents Maximum Burst Size. The range of the
value is 10 to 50.
Bridge mode Enable – Click it to enable Bridge mode for such channel.
Physical Members – Group the physical ports by checking the
corresponding check box(es) for applying the bridge
connection.
After finished the above settings, click OK to save the settings.
I
I
I
I
-
-
1
1
-
-
3
3
-
-
2
2
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
Such configuration is applied to upstream packets. Such information will be provided by ISP.
Please contact with your ISP for detailed information.
Available settings are explained as follows:
Item Description
QoS Type Select a proper QoS type for the channel.

Draytek Vigor 160 Series Specifications

General

Brand	Draytek
Model	Vigor 160 Series
Category	Modem
Language	English