Draytek Vigor 2762 Series User Manual

3
Interface
Description
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LAN4 Connectors for local networked devices.
DSL
Connector for accessing the Internet.
I / O Power Switch.
PWR Connector for a power adapter.

Draytek Vigor 2762 Series Specifications

General

WAN Ports	1 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
VPN Support	Up to 32 VPN tunnels
USB Ports	2 x USB 2.0
QoS	Yes
Power Supply	12V DC, 1.5A
WAN Interface	Gigabit Ethernet
Firewall	Yes (SPI)
VoIP	Yes