Draytek Vigor 2762 Series User Manual

4
V
V
i
i
g
g
o
o
r
r
2
2
7
7
6
6
2
2
a
a
c
c
LED
Status
Explanation
(Activity)
B
linking
The router is powered on and running
normall
y.
Off The router is powered off.
(Wireless LAN
O
n/Off/WPS)
On (Green)
The w
ireless access point is ready.
Blinking (Green) The data is transmitting via wireless connection based
on the rate of 2.4GHz.
Blinking (Orange) Blinks with one second cycle for two minutes. The WPS
f
unction is active.
Off
The w
irel
ess access point is
turned off.
(Wireless LAN
On/Off/WPS)
On (Green)
The w
ireless access point is ready.
Blinking (Green) The data is transmitting via wireless connection based
on the rate of 5GHz.
Blinking (Orange) Blinks with one second cycle for two minutes. The WPS
function is active.
(USB)
On
A USB device is connected
and
active.
B
linking
The data is transmitting.
(DSL)
Orange
On
The DSL link up, waiting for the Internet connection.
Blinking
Slowly - The DSL connection is ready for training.
Quickly
-
The DSL connection is synchronizing.
Green
On
The router is ready to access to the Internet through
DSL link.
B
linking
The data is transmitting.
~
(LAN1/2/3/4)
On The LAN port is connected.
Blinking The data is transmitting.
Off The LAN port is disconnected.

Draytek Vigor 2762 Series Specifications

General

WAN Ports	1 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
VPN Support	Up to 32 VPN tunnels
USB Ports	2 x USB 2.0
QoS	Yes
Power Supply	12V DC, 1.5A
WAN Interface	Gigabit Ethernet
Firewall	Yes (SPI)
VoIP	Yes