Draytek Vigor 2862 Series User Manual

7
Interface
Description
Wireless LAN
ON/OFF/WPS
Wireless band will be switched /changed according to the button
pressed and released. For example,
 2.4G (On) and 5G (On) – in default.
 2.4G (Off) and 5G (On) – pressed and released the button once.
 2.4G (On) and 5G (Off) – pressed and released the button twice.
 2.4G (Off) and 5G (Off) – pressed and released the button three
times.
When WPS function is enabled by web user interface, press this
button for more than 2 seconds to wait for client’s device making
network
connection
through
WPS.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the
button. Then the router will restart with the factory default
configuration.
USB
Connecter for a USB device (for 3G/4G USB Modem or printer or
thermometer).
DSL
Connecter for accessing the Internet.
LAN P1-P4
Connecters for local network devices.
P5 / WAN2
Connecter for local network devices or modem for accessing Internet.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.

Draytek Vigor 2862 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Passthrough	Yes
DoS Protection	Yes
Concurrent VPN Tunnels	50
LAN Interfaces	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Throughput	200 Mbps
Firewall Features	SPI, DoS/DDoS protection
VPN Protocols	IPSec, PPTP, L2TP
Routing Protocols	Static Routing, RIP v1/v2, OSPF
Security Features	Firewall, VPN, Content Filtering, DoS Protection
Management	Web Interface, CLI, SNMP
Dimensions	241mm x 165mm x 44mm
Power Supply	12V DC
Content Filtering	Yes, by URL keyword, category, and application