Vigor2830 Series Quick Start Guide
11
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
Blinking In ISDN NT (ISDN S0 intern) mode, it means an
ISDN phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice (phone
call) is transmitting.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
LAN
1(Giga)
Right LED
(Green)
Off The port is connected with 10/100Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
LAN
2/3/4
Right LED
(Green)
Off The port is connected with 10Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
WAN2
(Giga)
Right LED
(Green)
Off The port is connected with 10/100Mbps when left
LED is on.
Interface Description
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button for 2 seconds to wait for
client device making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button once to enable (WLAN
LED on) or disable (WLAN LED off) wireless connection.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Phone S0 Connecter for ISDN phone(s) only via ISDN phone adapter. Do not
connect any other device to such port or connect ISDN line, otherwise
the router might be damaged.
ISDN/Phone S0 Connecter for ISDN line or ISDN phone adapter in particular condition.
Refer to section 2.2 for more details.
Phone Connecter for PSTN phone.
Line Connector for PSTN life line.
LAN (1-4) Connecters for local networked devices.
DSL Connecter for accessing the Internet through ADSL2/2+.
WAN 2 Connecter for remote networked devices.
USB Connecter for a USB device (for 3G USB Modem or printer).
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.