Vigor2860 Series Quick Start Guide
5
LED
Off The port is connected with 10/100Mbps
On The port is connected.
Off The port is disconnected.
Left
LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
GigaLAN
1~6
Right
LED
Off The port is connected with 10/100Mbps
Interface
Description
Wireless LAN
ON/OFF/WPS
Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED
will be on.
Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless
function is not ready, the LED will be off.
When WPS function is enabled by web user
interface, press this button for more than 2 seconds to
wait for client’s device making
network connection
through WPS.
Factory Reset
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
USB
Connecter for a USB device (for 3G/4G USB
Modem or printer).
VDSL/ADSL
Connecter for accessing the Internet.
WAN2 (Giga)
Connecter for local network devices or modem for
accessing Internet.
GigaLAN 1-6
Connecters for local network devices.
PWR Connecter for a power adapter.
ON/OFF
Power Switch.
To Next Page
Loading...
Need help?
General
