Draytek Vigor2860 Series Quick Start Quide

Vigor2860 Series Quick Start Guide
45
3
3
.
.
3
3
.
.
2
2
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
1. On the Wireless LAN(2.4GHz or 5GHz) group, select General Setup.
The following page will be shown.
2. Check Enable Wireless LAN to enable the wireless function.
3. Choose Mixed (11b+11g+11n)/Mixed (11a+11n+11c) mode.
Note: In which, 802.11b/g operates on 2.4G band, 802.11a operates
on 5G band, 802.11n operates on either 2.4G or 5G band, and
802.11ac operates on 5G band only.
4. Type in the name of the SSID. The default name for SSID is DrayTek.
We suggest you to change it with a particular name.
5. Click OK to save the configuration.
Note: For the detailed information about wireless connection with
rate in 2.4GHz/5GHz, refer to User’s Guide.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering