Vigor2860 Series Quick Start Guide
10
Interface Description
Wireless LAN
ON/OFF/WPS
Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED
will be on.
Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless
function is not ready, the LED will be off.
When WPS function is enabled by web user
interface, press this button for more than 2 seconds to
wait for client’s device making
network connection
through WPS.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
USB Connecter for a USB device (for 3G/4G USB
Modem or printer).
VDSL2/ADSL Connecter for accessing the Internet.
WAN2 (Giga) Connecter for local network devices or modem for
accessing Internet.
GigaLAN 1-6 Connecters for local network devices.
Phone 1/2 Connecter for analog phone(s).
Line Connector for PSTN life line.
PWR
Connecter for a power adapter.
To Next Page
Loading...
Need help?
General
