Vigor2860 Series Quick Start Guide
3
Interface
Description
Factory Reset
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
USB
Connecter for a USB device (for 3G USB Modem or
printer).
VDSL/ADSL
Connecter for accessing the Internet.
WAN2
Connecter for local network devices or modem for
accessing Internet.
GigaLAN (1-6)
Connecters for local network devices.
PWR Connecter for a power adapter.
ON/OFF Power Switch.
To Next Page
Loading...
