Draytek Vigor2860 Series Quick Start Guide

Vigor2860 Series Quick Start Guide
8
Interface Description
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button once
to wait for client device making network connection
through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice
to enable (WLAN LED on) or disable (WLAN LED
off) wireless connection.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual,
release the button. Then the router will restart with
the factory default configuration.
USB Connecter for a USB device (for 3G USB Modem
or printer).
VDSL2/ADSL Connecter for accessing the Internet.
WAN2 (Giga) Connecter for local network devices or modem for
accessing Internet.
GigaLAN (1-6) Connecters for local network devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering