Draytek Vigor2860 Series Quick Start Guide

Vigor2860 Series Quick Start Guide
23
If your router can be under an environment with high speed NAT, the
configuration provide here can help you to deploy and use the router quickly.
The first screen of Quick Start Wizard is entering login password. After
typing the password, please click Next.
On the next page as shown below, please select the WAN interface that you
use. If DSL interface is used, please choose WAN1; if Ethernet interface is
used, please choose WAN2; if 3G USB modem is used, please choose
WAN3. Then click Next for next step.
WAN1, WAN2 and WAN3 will bring up different configuration page. Refer
to the following for detailed information.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering