Draytek Vigor2927 Series User Manual

5
On The QoS function is active.
QoS
Off The QoS function is inactive.
On
5G / 2.4G: Wireless access point with
bandwidth of 5GHz/2.4GHz is ready.
WLAN: Wireless access point is ready.
Off Wireless function is disabled.
(1)
5G / 2.4G
Blinking
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
WAN1,WAN2 / P6
On The port is connected.
Off The port is disconnected.
Left LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Right LED
Off The port is connected with 10/100Mbps.
LAN P1-P5
On The port is connected.
Off The port is disconnected.
Left LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
(2)
Right LED
Off The port is connected with 10/100Mbps

Draytek Vigor2927 Series Specifications

General

Brand	Draytek
Model	Vigor2927 Series
Category	Network Router
Language	English