6
No.
Interface Description
Wireless LAN
ON/OFF/WPS
Wireless band will be switched /changed according to the
button pressed and released. For example,
2.4G (On) and 5G (On) – in default.
2.4G (Off) and 5G (On) – pressed and released the
button once.
2.4G (On) and 5G (Off) – pressed and released the
button twice.
2.4G (Off) and 5G (Off) – pressed and released the
button three times.
When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client’s
device making
network connection through WPS.
(3)
Factory Reset
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
(4) USB1~2 / USB
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
(5)
WAN1
Connecter for local network devices or modem for
accessing Internet.
To Next Page
Loading...
Need help?
General
