Dreame L20 Ultra Complete User Manual

Note
When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in
time.
LED fill lights will provide auxiliary lighting in dimly lit environments.
Before Use
1. Connect to an Electrical Outlet
Insert the power cord into the base station and plug it into the socket. Place the base station in a location that is
as open as possible with a good Wi-Fi signal.
2. Place the Base Station and Install the Base Station Ramp Extension Plate
Remove any objects that are closer than 1.5 m from the front and 5 cm from either side of the base station.
Then install the base station ramp extension plate down to the base station.

Dreame L20 Ultra Complete Specifications

General

Suction Power	7000 Pa
Battery Capacity	6400 mAh
Dustbin Capacity	350 ml
Water Tank Capacity	80 ml
Auto Empty Station	Yes
Mopping Function	Yes
Self-Cleaning	Yes
Self-Emptying	Yes
Self-Refilling	Yes
Clean Water Tank Capacity (Dock)	4.5 L
Dirty Water Tank Capacity (Dock)	4 L
Dust Bag Capacity (Dock)	3.2 L
App Control	Yes
Navigation System	LiDAR
Runtime	180 minutes
Obstacle Avoidance	Yes
Drying	Yes
Weight	4.3 kg
Navigation	LDS LiDAR
Voice Control	Yes (Google Assistant, Alexa)
Charging Time	6 hours