17
EN
Care & Maintenance
Cleaning the Filter Assembly
1. Place the vacuum securely on a at surface, then turn the lter assembly cover in the
direction indicated and remove the lter assembly.
Note: Remove the built-in foam pad before cleaning the lter assembly.
Note: Fully dry the lter (at least 24 hours) before reinstalling it.
2. Rinse the lter and foam pad with water. To thoroughly remove all the dust caught in
the filter, rotate the filter 360 degrees while rinsing. Lightly tap the filter against a sink
several times to remove any excess debris. Keep the filter in a well-ventilated and cool
place to fully dry.
3
12
6
111
57
210
48
9
24 hrs
1
2
3
To Next Page
Loading...
